Water Shutoff (20 Kg)

  • Brand: Hemp Paint
  • Product Code: 32000
  • Availability: In Stock


Elastomeric resin-based, water-based lining that does not lose its flexibility when dried, and has thixotropic properties, and makes the application surface 100% waterproof.


  • Easy to apply using a brush or roller,
  • Since it is elastic, it adapts to daily and seasonal atmospheric conditions, temperature differences during the day, and building movements,
  • Adheres very well to the application surface, and provides 100% waterproofing,
  • Simplifies workmanship and saves time,
  • Also applicable outdoors, where there is no human traffic. Resistant to sunlight.


It is used as topcoat in Hemp Paint Iso Roof and Hemp Paint Iso Base applications, in valley gutters, at junction points of different materials, parapet and chimney surfaces and their junctions with roof, and for waterproofing places such as swimming pools, WCs, bathrooms, kitchens, and as a repair and insulation material on reinforced concrete, brick and plastered surfaces, and for repairing plaster cracks and similar deformations in the building. In addition to its waterproofing purpose, it is also suitable for use outdoors to protect the building against wind and similar external factors. It should be used together with Hemp Paint Fixator Primer for repairing bituminous membrane applications.


If it is to be applied alone, free particles on the surface should be cleaned by mechanical methods, and the surface should be dry and robust. If there is any damage on the surface, the surface should be strengthened by means of putty and filling materials. Mold or similar organic formations should be removed by means of chlorinated solutions. Hemp Paint Fixator Primer should be used as primer.


The product is sold ready to use, so no thinner should be added. The ambient temperature in the place of application should be between +5 and +30 °C. Waiting time between the coats should be respected. It takes 30 minutes to dry to the touch, and 24 hours to dry completely.


Avoid exposure to direct sunlight. The ambient temperature of the storage place should be between +5 and +35 °C. The product must be protected from freezing. The product should be kept closed when not in use.

Technical Features
Consumption (2 Coats) 1,0 - 2,0 kg / m²
Drying Time 2 hours (20 °C), 5 hours (10 °C)
Density 1,44 - 1,54 gr / lt Thixotropic
Tensile Strength 6,04 N
Water Transfer Rate 0,70 gr (m² x Gün)
Elongation at Break % 200
Steam Diffusion 30 gr (m² x Gün)
Colour White, Red, Green
Application Tools Brush, Roller
Package Type Plastic Bucket
Shelf Life 12 Months (Sealed)

Write a review

Note: HTML is not translated!
    Bad           Good